ProSafe® Gigabit L3 Managed Stackable Switches Software Administration Manual
Protocol Based VLAN Group Membership
To display the Protocol Based VLAN Group Membership page, click Switching
Advanced
Protocol Based VLAN Group Membership.
1.
Use Group ID to select the protocol-based VLAN Group ID for which you want to display
or configure data.
2.
Use Port List to add the ports you selected to this Protocol Based VLAN Group. Note that a
given interface can only belong to one group for a given protocol. If you have already added
a port to a group for IP, you cannot add it to another group that also includes IP, although
you could add it to a new group for IPX.
Table 3-51.
Field
Group Name
Current Members
146 |
Chapter 3. Configuring Switching Information
Description
This field identifies the name for the protocol-based
VLAN you selected. It can be up to 32 alphanumeric
characters long, including blanks.
This button can be click to show the current numbers
in the selected protocol based VLAN Group.
VLAN