Configuring Login Banners - Dell PowerEdge VRTX Getting Started Manual

FILE LOCATION: C:\Users\gina\Desktop\Checkout_new\Maintenance Projects\Dell
Configuring an Initial SSH Password
To configure an initial SSH password, enter the following commands:
console(config)# aaa authentication login default line
console(config)# aaa authentication enable default line
console(config)# line ssh
console(config-line)# login authentication default
console(config-line)# enable authentication default
console(config-line)# password jones
Configuring an Initial HTTP Password
To configure an initial HTTP password, enter the following commands:
console(config)# ip http authentication aaa login-authentication local
console(config)# username admin password user1 privilege 15
Configuring an Initial HTTPS Password
To configure an initial HTTPS password, enter the following commands:
console(config)# ip http authentication aaa login-authentication local
console(config)# username admin password user1 privilege 15
Enter the following commands once when configuring use of a terminal, a
Telnet, or an SSH session, for an HTTPS session.
NOTE:
In the Web browser, enable SSL 2.0 or greater for the page content to be
displayed.
console(config)# crypto certificate 1 generate key-generate
console(config)# ip http secure-server
NOTE:
HTTP and HTTPS services require privilege level 15 access and connect
directly to the configuration level access.

Configuring Login Banners

Banners can be defined for each line, such as console and telnet) or for all
lines. They are disabled by default.
D E L L C O N F I D E N T I A L – P R E L I M I N A R Y 3 / 6 / 1 3 - F O R P R O O F O N LY
20
Using the CLI
Plasma\GSG\Plasma_UGUsing_CLI.fm