Rack Warnings And Precautions; Server Warnings And Precautions - Compaq ProLiant ML350 G2 Tower-To-Rack Conversion Manual

2-2 Compaq ProLiant ML350 Generation 2 Tower-to-Rack Conversion Guide

Rack Warnings and Precautions

Server Warnings and Precautions

Before beginning these procedures, read and understand the following
statements.
WARNING: To avoid the risk of personal injury or damage to the equipment, at
least two people are needed to safely unload the rack from the pallet. An empty
42U rack weighs 115 kg (253 lb), is over 2.1 m (7 ft) tall, and may become
unstable when being moved on its casters. Do not stand in front of the rack as it
rolls down the ramp from the pallet, but handle it from the sides.
WARNING: To reduce the risk of personal injury or damage to the equipment,
be sure that:
I
The leveling jacks are extended to the floor.
I
The full weight of the rack rests on the leveling jacks.
I
The stabilizing feet are attached to the rack if it is a single-rack
installation.
I
The racks are coupled together in multiple-rack installations.
I
Only one component is extended at a time. A rack may become unstable if
more than one component is extended for any reason.
Before beginning these procedures, read and understand the following
statements.
WARNING: To avoid the risk of personal injury or damage to the equipment, a
minimum of two people MUST lift the server into the rack. The server weighs
about 27.24 kg (60 lb). If the unit is to be loaded above chest level, a third
person must assist in aligning the rails while the other two support the unit.
WARNING: To reduce the risk of personal injury from hot surfaces, allow the
hot-plug drives and internal system components to cool before touching them.