Switches; System Maintenance Switch Settings (Sw1); Peripheral Board Configuration (Maintenance) Switchbank (Sw1) Settings - Compaq ProLiant ML570 Maintenance And Service Manual

4-6 Compaq ProLiant ML570 Server

Switches

This section provides information about internal switches for the ProLiant ML570 server.

System Maintenance Switch Settings (SW1)

Figure 4-5 shows the system maintenance switchbank and the default settings for the
ProLiant ML570 server. Table 4-5 describes the peripheral board switch settings.
Figure 4-5. Peripheral board configuration (maintenance) switchbank (SW1) location and
default settings

Peripheral Board Configuration (Maintenance) Switchbank (SW1) Settings

Switch
1
2
3
4
5
6
Function
Video disable override
Lock configuration
Tower-to-rack conversion
Diskette boot feature
Power on password
Maintenance
off
1
2
3
4
5
6
Table 4-5
Open (OFF) Default Position
Onboard integrated video
is enabled
Configuration unlocked and
can be altered
Tower configuration
Diskette boot can be
changed through system
configuration utility
Power on password feature
is enabled
NVRAM is validated;
configuration saved
Closed (ON) Position
Onboard integrated video
is disabled
Locks system configuration
and cannot be altered
Rack-mount configuration
Diskette drive is enabled for
booting, overriding the
system configuration utility
Power on password feature
is disabled
NVRAM is invalidated;
configuration erased