Configure Date And Time Periodic Synchronization Dialog Box - HP StorageWorks 2/140 - Director Switch Product Manager Manual

Monitoring and Managing the Director
The current date and time display in the Date and Time fields. If the Periodic
Date/Time Synchronization field is checked, the Date and Time fields are
disabled (grayed out).
To enable and disable Periodic Date/Time Synchronization, click the check box
and then click Activate.
S/390 mode only. An error will result if periodic synchronization and clock alert
mode are enabled.
Figure 2–6: Configure Date and Time Periodic Synchronization dialog box
2. Perform one of the following steps:
• To immediately synchronize the director date and time with the HAFM server, be
sure the Periodic Date/Time Synchronization option is enabled and then click
Sync Now.
NOTE: If you enable the Periodic Date/Time Synchronization feature and click Activate,
the time will synchronize at the next update period.
• To set the director with a specific date and time, make sure that the Periodic
Date/Time Synchronization field is not selected. Refer to
date and time, and then click Activate.
Figure 2–7: Configure date and time (manually)
NOTE: Use the range of 0 to 23 for hours. Use the range of 0 to 59 for minutes and
seconds.
2–12
Figure 2–7. Enter the
director product manager user guide