Set Switch Date And Time; Set Date And Time Manually; Configure Date And Time Dialog Box - HP 316095-B21 - StorageWorks Edge Switch 2/24 Installation Manual

Installing and Configuring the Edge Switch 2/24

Set Switch Date and Time

The Edge Switch 2/24 Product Manager log entries are stamped with the date and
time received from the switch. To set the effective date and time for the switch:
1. At the Hardware View page for the selected switch, choose Configure >
Figure 13: Configure Date and Time dialog box

Set Date and Time Manually

To set the switch date and time manually:
1. At the Configure Date and Time dialog box, click Periodic Date/Time
2. Click the Date fields that require change, and type numbers in the following
3. Click the Time fields that require change, and type numbers in the following
4. Click Activate to set the switch date and time and close the Configure Date
50
Date/Time. The Configure Date and Time dialog box displays
The switch date and time can be set manually, or set to be periodically
updated by the HAFM application (the switch and HAFM application
synchronize at least once daily).
Synchronization to deselect the option (no check mark in the box). The
greyed out Date and Time fields activate.
ranges:
Month (MM): 1 through 12
Day (DD): 1 through 31
Year (YY): greater than 1980
ranges:
Hour (HH): 0 through 23
Minute (MM): 0 through 59
Second (SS): 0 through 59
and Time dialog box.
(Figure
Edge Switch 2/24 Installation Guide
13).