Cli: To View And Configure Switch Meshing; Viewing Switch Mesh Status - HP ProCurve 5300xl Series Management Manual

Switch Meshing
Configuring Switch Meshing
Port Configured
for Meshing
Figure 7-11. Example of the Show Mesh Report
7-14

CLI: To View and Configure Switch Meshing

Port Status and Configuration Features
Feature

viewing switch mesh status

configuring switch meshing

Viewing Switch Mesh Status

Syntax: show mesh
Lists the switch ports configured for meshing, along with the
State of each mesh-configured connection, the MAC address
of the switch on the opposite end of the link (Adjacent Switch),
and the MAC address of the port on the opposite end of the
link (Peer Port).
Reading the Show Mesh Output. For each port configured for meshing,
the State column indicates whether the port has an active link to the mesh or
is experiencing a problem. The status of the backwards compatibility option
is also displayed. For more details on the backwards compatibility option see
"CLI: Configuring Switch Meshing" on page 7-17.
Operating State
MAC Address of the
of the Link
Switch to which Port
C1 Is Connected
Default Menu
n/a n/a
Disabled n/a
Backwards
compatible
mode status
MAC Address of the
Switch Port to which
Port C1 is Connected
CLI Web
below n/a
n/a