Node List View - HP 316095-B21 - StorageWorks Edge Switch 2/24 Planning Manual

Planning Considerations for Fibre Channel Topologies
5. Ensure FICON devices are logged in — Verify FICON devices are logged
Figure 51: Node List View
6. Enable Enterprise Fabric Mode — Enable Enterprise Fabric Mode as
128
b. In the HAFM application, configure fabric binding. Refer to installation
instructions in the HA-Fabric Manager User Guide.
c. In the Element Manager application, configure switch binding. Refer to
the installation instructions in the appropriate installation manual for your
Director or Edge Switch.
in to each director or switch as follows:
a. At the Element Manager application's Hardware View, click the Node
List tab. The Node List View displays
b. Inspect the node descriptors and verify that the correct FICON devices
(channels and control units) are logged in to each director or switch.
follows:
a. Minimize the Element Manager application to display the SAN
management application, then select Enterprise Fabric Mode from the
Configure menu. The Enterprise Fabric Mode dialog box displays
(Figure 52).
(Figure 51).
SAN High Availability Planning Guide