2.
Click New. The New Threshold Alert dialog box is displayed, as shown in
Figure 26
New Threshold Alerts dialog box
3.
Enter a name from one to 64 characters in length. All characters in the ISO Latin-1 character set,
excluding control characters, are allowed.
4.
Select one of the following from the Threshold Type drop-down list:
• Transmit—An alert will occur if the threshold set for transmit throughput is reached.
• Receive—An alert will occur if the threshold set for receive throughput is reached
• Receive and Transmit—An alert will occur if the threshold set for either receive or transmit
throughput is reached.
5.
Click Next. A new screen is displayed with additional parameters, as shown in
name configured for the alert is displayed at the top of the screen.
NOTE:
Figure 27
New Threshold Alerts dialog box
56
Installing and configuring the Edge Switch 2/24
Click Previous if you need to return to the previous screen.
first screen
—
second screen
—
Figure
26.
Figure
27. The