Fabrics View - HP 316095-B21 - StorageWorks Edge Switch 2/24 User Manual

Using the HAFM Window

Fabrics View

To access the Fabrics view, click the Fabrics tab. The Fabrics view displays, as
shown in Figure 2–15, Fabrics
Figure 2–15: Fabrics view
The Fabrics view is divided into two panels. The left panel, the Fabric Tree, contains
an expandable list of fabrics, products in fabrics, and nodes connected to products.
The tree displays all fabrics currently known to the HAFM server.
The right panel is the view area. At the bottom of the view area are two tabs that
change the view of the fabric: the Topology tab and the Zone Set tab.
In the Topology tab view area, right-click a product icon for a menu of options for the
particular product. Right-click a blank part of the view to display a menu of options
for the fabric.
In the Zone Set tab, the currently active zone set for fabrics that you chose in the
Fabric Tree is displayed in the view area.
For a complete description of the Fabrics view, refer to
2–10
view.
Chapter 5.
ha-fabric manager user guide