View Context Menus; View Pop-Up Menu - HP 316095-B21 - StorageWorks Edge Switch 2/24 User Manual

• Status indicator. This is the colored symbol behind the product's illustration in the
icon.
— A blinking red and yellow diamond means that the product has failed and
requires immediate service.
— A yellow triangle means that the product is degraded, but is still performing as
designed.
— A green circle means that the product is fully operational.
— A gray square means that the HAFM cannot determine product status.
If a status symbol does not display behind the product, the product is not managed
by the HAFM server to which you are logged in.
The product name or network address displays at the bottom of the icon. Switch
between the name and address through Display Options in the view pop-up menu.
Refer to

View Pop-Up Menu

NOTE: If the product name displays inside the icon, moving the cursor over the icon displays
the network address below the icon. If the network address displays inside the icon, moving the
cursor over the icon displays the product name below the icon.
The most critical status reflected by a product in the view is also reflected in the
Products status bar in the left corner of the HAFM status bar. For example, if a
product is degraded, a yellow triangle displays in the status bar.

View Context Menus

Two pop-up menus are available by right-clicking in the view. One is available when
you right-click the view, away from a product icon, and the other when you right-click
a product icon. Refer to
View Pop-Up Menu
The pop-up menu that displays when you right-click the view area (away from a
product icon) enables you to add products, change product icon labels, and sort
product icons in the view. Use the following procedures to use these menu options.
ha-fabric manager user guide
in the next section for details.
Product Icon Pop-Up Menu on page
Using the Products View
4-5.
4–3