Unpersisting Fabrics; Available Menu Bar Options; Product - HP 316095-B21 - StorageWorks Edge Switch 2/24 User Manual

— Failed — Fabric has split into two or more fabrics.
— Unknown — No information is known about the fabric.
Note that this status is also reflected by colored icons by the fabric name in the
Fabric Tree (refer to
• Description of the change.
NOTE: Unpersisting the fabric will remove all data from the Fabric Log.

Unpersisting Fabrics

You can a unpersist a fabric by choosing Fabric > Unpersist Fabric Topology, the
right-click fabric pop-up menu in the Fabric Tree, or the right-click view pop-up menu
in the Topology view area.
Choosing this option displays a warning that the fabric log will be lost if the fabric is
unpersisted. Click Yes to unpersist the fabric and the current view of the fabric
displays in the tab's view area without the fabric status indicators. The name of the
fabric in the Fabric Tree changes back to the fabric's WWN. A fabric status icon will
not appear by the WWN.

Available Menu Bar Options

This section provides detail on the options that are active in the Product, Fabrics,
View, and Configure menus on the menu bar when you are using the Topology tab.
For information on other menu options, refer to

Product

Choose the Product menu on the menu bar to display the following options:
Open
Click this to open the Product Manager for the product. Also open a product through
the right-click product pop-up menu in the Fabric Tree. Refer to
more information.
Properties
Click this to display a Properties dialog box for elements selected in the Topology tab
view area. If a product is selected, the Properties dialog box for the Switch or
Director displays (refer to
Properties dialog box for the fabric displays (refer to
ha-fabric manager user guide
Status Icons on page
Properties on page
Using the Fabrics View
5-4).
Chapter 3, Using the Menu
Open on page 5-7
4-6.) If nothing is selected, the
Properties on page
Bar.
for
5-6).
5–17