Display Configured Zone Sets And Zones; Configure Zones - HP 316095-B21 - StorageWorks Edge Switch 2/24 User Manual

Fabric Zoning
Menu
Right-click menu
(zoning library)
Right-click menu
(zoning library)

Display Configured Zone Sets and Zones

Click the Zone Sets tab (default) to display all configured zone sets.
Click the Zones tab (default) to display all configured zones.
Click a zone set or zone to select it. Once selected, use options from the File menu to
modify, rename, delete, or obtain properties for zones and zone sets. Use options from
the Edit menu to copy zone sets, copy zones, find zones in zone sets, and find
members in zones.

Configure Zones

A zone is a set of members. These members can be physical ports of managed
products in a fabric or nodes attached to managed products. Ports are identified by the
managed product domain and physical port member. Devices are identified by the
WWN of the device. You can configure up to 4,096 members in a single zone.
Use the following steps to configure a zone:
1. Open the Zoning Library by choosing Configure > Zoning Library.
2. Click the Zones tab.
3. Choose File > New. The New Zone dialog box displays
page 6-15).
4. Enter a name for the zone in the Zone Name field.
NOTE: Names for zones and zone sets must follow specific rules. Refer to
Conventions for Zones and Zone Sets on page 6-5
5. Select the fabric for which zoning is being configured from the drop-down menu.
6. In the Attached ports/nodes area, click the icon to the left of a numbered domain
folder to display a list of ports and attached nodes for the Director or Switch. Note
that the WWN for the Switch or Director displays to the right of the product's
domain number.
A list of ports with attached nodes expands under the selected domain.
6–14
Menu Option
Delete
Properties
Procedures
Delete Zones and Zone
page 6-21
Display Zone and Zone Set
Properties, page 6-22
(Figure 6–4 on
for details.
ha-fabric manager user guide
Sets,
Naming