HP 316095-B21 - StorageWorks Edge Switch 2/24 User Manual page 185

Message
No zone set selected.
Only attached nodes
can be displayed in this
mode.
Password and
confirmation don't
match.
Product Manager
instance is currently
open.
Remote session
support has been
disabled.
Remote sessions are
not allowed from this
network address.
Resource is
unavailable.
ha-fabric manager user guide
Description
A zoning operation was
attempted without a zone
set selected.
Users cannot display
unused ports when adding
ports by World Wide Name.
Entries in the password field
and confirmation password
field do not match. The
entries are case sensitive
and must be the same.
A product cannot be deleted
while an instance of the
Product Manager
application is open for the
same product.
The connection between the
specified remote
workstation and the HAFM
server was disallowed.
Only IP addresses of
remote workstations
specified at the Configure
Sessions dialog box are
allowed to connect to the
HAFM server.
The specified operation
cannot be performed
because the product is
unavailable.
Information and Error Messages
Action
Choose a zone set and
try the operation again.
Change the add criteria
to Add by Port.
Enter the password and
confirmation password
again.
Close the Product
Manager application,
then delete the product.
Consult with the
customer's network
administrator to
determine if the
workstation entry should
be modified at the
Configure Sessions
dialog box.
Consult with the
customer's network
administrator to
determine if the IP
address is to be
configured for remote
sessions.
Verify the HAFM
server-to-product link is
up. If the link is up, the
HAFM server may be
busy. Try the operation
again later.
A–13