HP 316095-B21 - StorageWorks Edge Switch 2/24 User Manual page 183

Message
Invalid World Wide
Name or nickname.
Invalid World-Wide
Name. Valid WWN
format is:
xx:xx:xx:xx:xx:xx:xx:xx.
Invalid zone in zone set.
Limit exceeded.
No address selected.
No attached nodes
selected.
No HAFM server
specified.
ha-fabric manager user guide
Description
The World Wide Name or
nickname that you have
specified is invalid. The
valid format for the World
Wide Name is eight
two-digit hexadecimal
numbers separated by
colons
(xx:xx:xx:xx:xx:xx:xx:xx).
The valid format for a
nickname is non blank
characters, up to 32
characters.
The specified World Wide
Name format is invalid. The
valid format is eight two-digit
hexadecimal numbers
separated by colons
(xx:xx:xx:xx:xx:xx:xx:xx).
The defined zone no longer
exists and is invalid.
You cannot add a new
product or user to the HAFM
if the maximum number of
that resource already exists
on the system.
You cannot complete the
operation because an
address has not been
selected.
An operation was attempted
without an attached node
selected.
An HAFM server is not
defined to the HAFM
application.
Information and Error Messages
Action
Try the operation again
using a valid World Wide
Name or nickname.
Enter a World Wide
Name using the correct
format.
Use a valid zone when
creating the zone set.
Delete unneeded
products or users from
the system, before
attempting to add any
new ones.
Choose an address and
retry the operation.
Choose an attached
node and try the
operation again.
At the HAFM Login
screen, type a server
name in the HAFM
Server field and click the
Login button.
A–11