Fabric Binding - HP 316095-B21 - StorageWorks Edge Switch 2/24 User Manual

Show Zone Members
Click to display the Show Zone Members dialog box. This dialog box displays a tree
of all products in the fabric in the left panel. Click an icon by a product to expand the
list of attached nodes. Select a node and the WWNs or nicknames (if configured) of
nodes that are members of the same zone as the selected node display in the right
panel. Refer to
Show View Port
Click the check box to display the View Port secondary window. Click inside the
window and move the mouse to adjust the view of the fabric in the tab's view area.
Clear the check box to remove the View Port window from the screen.
Show Fabric Tree
Select the check box to display the Fabric Tree on the left side of the Fabrics tab.
Clear the check box to remove the Fabric Tree from the left side of the Fabrics tab.
Enterprise Fabric Mode
This option is only available if the SANtegrity feature is installed on each Switch in
the fabric. Click to display the Enterprise Fabric Mode dialog box. Use this dialog
box to enable and disable Enterprise Fabric Mode. Enabling this mode automatically
enables SANtegrity fabric and Switch binding, as well as the rerouting delay, domain
RSCNs, and insistent domain ID parameters for each Switch in the fabric. For details
on using this option, refer to

Fabric Binding

This option is only available if SANtegrity features are installed on each Switch in the
fabric. Click to display the Fabric Binding dialog box. Use this dialog box to enable
and disable Fabric Binding and add Switches and Directors to the Fabric Binding
Membership List. Switches in this list are allowed to connect to the fabric. For details
on using this option, refer to
ha-fabric manager user guide
Chapter 6 for details on zoning and zoning configuration.
Enterprise Fabric Mode on page
Fabric Binding on page
Using the Fabrics View
8-12.
8-6.
5–23