Activate Zone Set - HP 316095-B21 - StorageWorks Edge Switch 2/24 User Manual

Using the Menu Bar
2. Click in the Community Name column and enter the SNMP community name for
a trap recipient. This name defines the community name that SNMP managers use
for reading variables from or writing variables to the HAFM server. This name
must be 64 characters or less.
To modify existing fields in this dialog box, click in the field and enter your
changes.
3. Select the Write Authorization check box to grant or deny the configured SNMP
management station write authorization. When this option is selected, an
administrator at an SNMP management station has write permissions for writable
MIB objects on the HAFM server.
4. Click in the Trap Recipient column, and enter the IP address or DNS host name
for a trap recipient (SNMP management station). This must be 64 characters or
less.
5. If you want the trap recipient to be an active recipient, click the check box in the
Active column to add a checkmark. If you want to configure the recipient and then
activate the recipient at a later time, leave the check box empty.
6. To override the default User Datagram Protocol (UDP) port number for a trap
recipient with any legal, decimal UDP number, enter the UDP port number in the
UDP Port Number column.
7. To enable or disable the SNMP agent to capture events, select the Enable SNMP
Agent on server check box.
8. To enable or disable authorization traps to be sent when unauthorized
management stations try to access SNMP information through the HAFM server,
select the Enable Authorization Traps check box.
9. Click OK to accept and activate the data.

Activate Zone Set

Opens the Activate Zone Set dialog box that allows you to select and activate
configured zone sets. Only one zone set in the fabric can be active at one time.
Activating a zone set replaces the current active zone set with the one you activate.
The dialog box displays all zone sets currently configured for the fabric. You can click
Next to display additional screens that help you through the activation process or
Previous to view previous screens. Refer to
details on zoning and use of this dialog box.
3–20
Activate Zone Sets on page 6-26
ha-fabric manager user guide
for