HP 316095-B21 - StorageWorks Edge Switch 2/24 User Manual page 160

Optional Features
• Switch Clock Alert Mode
Click this check box to display a check mark and enable clock alert mode. If this
is enabled, the following occurs when users set the date and time through the
Configure Date and Time dialog box (Configure menu):
— If you enable Periodic Date/Time Synchronization, an error message
displays indicating that Clock Alert Mode must be cleared to enable
automatic synchronization of the date and time.
— If you manually set the date and time (Periodic Date/Time Synchronization
is not enabled), a confirmation dialog box will display. You must click OK on
that dialog box to continue manual configuration.
• Host Control Prohibited
Click this check box to display a check mark and prohibit a host management
program from changing configuration and connectivity parameters on the Switch.
In this case, the host program will have read authorization only and cannot make
changes. When the check mark is not displayed, a host program can change
configuration and connectivity parameters on the Switch.
• Programmed offline state control
Click this check box to display a check mark and enable a host management
program to control the Switch's offline and online state. When a check mark is not
displayed, a host program cannot set the Switch online or offline.
• Active=Saved
Click this check box to display a check mark and enable the active=saved
function for the IPL address configuration.
— If Active=Saved is enabled (check mark), the IPL and the active address
configuration are maintained as identical configurations. If a new
configuration is activated through the Configure Addresses - "Active" dialog
box, that configuration becomes the IPL address configuration.
— If Active=Saved is not enabled (no check mark), the IPL address
configuration and the active configuration are not maintained as identical, and
may be different configurations. If the feature is not enabled, you can modify
the IPL configuration through the Configure Addresses - "Active" dialog
box. If the feature is enabled, the IPL file is locked to modification through
the Configure Addresses - "Active" dialog box.
8–2 ha-fabric manager user guide