Test Remote Notification - HP 316095-B21 - StorageWorks Edge Switch 2/24 User Manual

Using the Menu Bar
4. To enable or disable e-mail notification, choose the Enable E-Mail Event
Notification check box.
5. This will enable e-mail notification for all Product Managers if e-mail notification
is enabled through each Product Manager's Enable E-Mail Notification option.
If the Enable E-Mail Event Notification check box is not selected, e-mail
notification is disabled for all Product Managers.
6. Click OK to confirm the information that you have entered.
The SMTP server address and e-mail addresses can be up to 64 characters.

Test Remote Notification

Use the test remote notification feature to test the call-home feature and the current
configuration parameters for the e-mail notification feature.
• To use this feature you must first configure telephone numbers and other
information for the Call-Home feature. In LAN-based environments, call home
event notification requires installation of Proactive Service software. This service
is offered at no additional charge for susbsystems covered under an on-site
warranty or an on-site storage hardware support contract. To register or order
Proactive Service software, contact your HP Customer Service representative.
• Configure Call-Home event notification through the HAFM Maintenance menu
(refer to
• Configure e-mail through the HAFM Maintenance menu
E-Mail on page 3-23
• Enable Call-Home event notification through the Product Manager Maintenance
menu.
Once you have run the test, you should contact the call-home recipient or the e-mail
recipient to confirm that a message was received.
1. Choose Maintenance > Test Remote Notification.
The Test Remote Notification dialog box displays
Figure 3–12: Test Remote Notification dialog box
3–24
Configure Call-Home Event Notification on page
.
)
3-26).
Configure
(refer to
(Figure 3–12).
ha-fabric manager user guide