HP 316095-B21 - StorageWorks Edge Switch 2/24 User Manual page 70

Using the Menu Bar
2. Click the Allow remote management sessions check box (a check mark
displays) to allow remote access from remote workstations. If you do not choose
this option, remote access is blocked even if you provide access information in
other parts of this dialog box. Use this check box as a method to prohibit remote
access while saving the current access administration in this dialog box.
NOTE: If this option is not selected, existing sessions will not terminate, but future sessions will
be prohibited.
3. Select the number of remote management sessions to be allowed from the
Maximum number of remote management sessions list.
4. If you do not want to restrict access to the HAFM, click Allow any network
address to connect and click OK.
5. If you want to restrict access to an address:
a. Click Restrict access to the following network addresses.
b. Click Add. The New Network Address dialog box displays.
c. Enter the IP address of the remote workstation to be authorized in the
Network Address field.
d. Click OK. The New Network Address dialog box closes.
e. Click OK on the Configure Sessions dialog box.
6. If you want to remove the access currently granted to a remote workstation:
a. Click Restrict access to the following network addresses. The IP addresses
display in the Network Address Restrictions area.
b. Select the address to be deleted.
c. Click Remove.
d. Click Yes in the Warning dialog box.
e. Click OK to save the required changes.
3–18 ha-fabric manager user guide