Configuring Remote Workstations: HP-UX,
This appendix describes the procedures for installing the high availability fabric
manager on a remote HP-UX, AIX, or Linux workstation. To run the High Availability
Fabric Manager on a remote workstation, you must first download and install the High
Availability Fabric Manager application from the HAFM server.
NOTE: The figures in this chapter show Netscape Navigator as the internet browser; however,
it is acceptable to use Microsoft Internet Explorer during these procedures.
Requirements
The download and installation process requires the use of a PC with the following
minimum system requirements:
•
Operating system (one of the following):
— HP-UX 11.
— AIX minimum version 4.3.3.
— Linux minimum version 2.2.5.
•
400 MHz HA PA-RISC processor.
•
128 MB RAM.
•
Available disk space:
— 90 MB for HP-UX
— 40 MB for AIX minimum version 4.3.3.
— 55 MB for Linux minimum version 2.2.5.
•
Video card supporting 256 colors at 800 x 600 resolution.
ha-fabric manager user guide
AIX, and Linux
D
D–1