Out-Of-Band Product Management - HP 316095-B21 - StorageWorks Edge Switch 2/24 User Manual

Ha-fabric manager user guide
Hide thumbs Also See for 316095-B21 - StorageWorks Edge Switch 2/24:
Table of Contents

Advertisement

Introduction and General Information
Management through the Internet using the EWS interface installed on the
Director or Switch. This interface supports configuration, statistics monitoring,
and basic operation of the product, but does not offer all the capabilities of the
corresponding Product Manager application. Administrators launch the web
server interface from a remote PC by entering the product's IP address as the
Internet uniform resource locator (URL), then entering a user name and password
at a login screen. The PC browser then becomes a management console.
Management through a PC-based Telnet session using the command line interface
(CLI). Any platform that supports Telnet client software can be used.
Figure 1–1
illustrates an example of out-of-band product management. In the figure,
the managed product is a Director 2/64. The "customer intranet" could be as simple as
an HP Ethernet hub to connect these devices.
Stora geWo
rks SAN
6064
1
SNMP management workstation
or remote user workstation
2
HAFM server
Figure 1–1: Out-of-Band product management
1–2
2
1
Customer Intranet
Customer Intranet
(10/100 Mbps)
(10/100 Mbps)
Internet
Connection
4
3
Web browser
4
Director 2/64
3
SHR-2314
ha-fabric manager user guide

Advertisement

Table of Contents
loading

Table of Contents