HP 316095-B21 - StorageWorks Edge Switch 2/24 User Manual page 206

Configuring Remote Workstations: Solaris Systems
8. Click Next.
The Choose Install Folder screen displays (similar to
9. Choose a folder on the remote workstation in which to store the HAFM software.
You can accept the default location, type in the path to a new location, or click
Choose to browse for an appropriate location. Click Restore Default Location to
change the location back to the default.
10. Click Next.
NOTE: If the High Availability Fabric Manager is already installed on the system, you will be
prompted to uninstall the existing version of the High Availability Fabric Manager. If you want to
uninstall the existing software, click Yes and press Next. In the Uninstall High Availability
Fabric Manager window, click Uninstall. When the uninstallation process is done, click Quit.
The Choose Shortcut Location screen displays.
11. Select a shortcut location. The options for the location of High Availability Fabric
Manager links are:
• In your home folder—Adds a new program group on the Start menu for the
High Availability Fabric Manager.
• Other—Enables you to choose any location on your hard drive or network for
the High Availability Fabric Manager files.
• Don't create links—Prevents the installation from creating a link for the
High Availability Fabric Manager.
12. Click Next to begin the installation.
The Pre-Installation Summary screen displays (similar to High Availability
Fabric Manager).
13. Review the installation information and click Install.
The progress of the installation is tracked on the Installing HP StorageWorks
HAFM screen (similar to
14. When complete, the screen shown in
desired, enable the Start the High Availability Fabric Manager check box to
immediately open the High Availability Fabric Manager. Click Done to close the
Install Complete dialog box.
C–4
Figure B–10 on page
Figure B–11 on page B-10
Figure B–7 on page
B-10).
displays. If
ha-fabric manager user guide
B-7).