New Zone Dialog Box - HP 316095-B21 - StorageWorks Edge Switch 2/24 User Manual

Figure 6–4: New Zone dialog box
NOTE: The icon that you click to expand the list of ports may not appear by a domain where no
nodes attached to ports.
7. Add members to the new zone using the following steps:
a. Decide if you want to add members by port number or WWN of attached
node.
— If you want to add zone members by port number only (not supported in
— If you want to add zone members by the WWNs of attached nodes, click
ha-fabric manager user guide
Open Fabric 1.0 interop mode), click the Add by Port radio button at the
bottom of the display area. Click the icon next to the domain folder again
to display only the products in the Attached ports/nodes area. If the
operating mode is set to Open Fabric Mode and you select the Add by
port number option, a message will display indicating that "Zoning
may be configured by port but will actually be
enforced by WWN in Open Fabric Mode"
the Add by WWN radio button, then click the icon by the domain folder
again. This displays all ports and the WWNs of nodes attached to those
ports in the Attached ports/nodes area. To display nodes by their WWN
or nicknames (if configured), click the Display Options button and select
either Nickname or World Wide Name from the Display Options dialog
box. Click the icon by the domain folder again to expand the list of nodes.
Fabric Zoning
6–15