Active Tool Bar Options; Open Product; Properties; Display Drop-Down Box - HP 316095-B21 - StorageWorks Edge Switch 2/24 User Manual

Advanced Zoning
Choose this option to open a secondary menu with the following options:
• Deactivate Zone Set. Click this option to display the Deactivate Zone Set dialog
box. Use this dialog box to deactivate the current active zone set. Click Start to
begin the process, and messages display to indicate deactivation status. When the
Close button displays, you can close the dialog box. Refer to
page 6-7
• Configure Default Zone. Click this option to display the Configure Default
Zone dialog box. Use this dialog box to enable and disable the default zone. Click
Start to begin the process, and messages display to indicate process status. When
the Close button displays, you can close the dialog box. Refer to
page 6-7

Active Tool Bar Options

Certain options on the tool bar are active in the Topology tab to provide quick access
to frequently-used options that are also in tab menus. For information on other tool bar
options, refer to

Open Product

This tool bar option is available only when you select a product in the Topology tab
view area. Click this to open the Product Manager for the product. Also open a
product through the right-click product pop-up menu in the Fabric Tree. Refer to
on page 5-7

Properties

Click this to display a Properties dialog box for elements selected in the Topology tab
view area. If a product is selected, the Properties dialog box for the Switch or
Director displays (refer to
Properties dialog box for the fabric displays (refer to

Display Drop-Down Box

Click this drop-down list to change the product label under the product icon in the
Topology tab's view area. This display can be changed to Product Name, Network
Address, World Wide Name, Domain ID, Nickname. These same options are
available under the Display Option submenu on the right-click pop-up menu in the
tab's view area. Refer to
ha-fabric manager user guide
for details on zoning and use of this dialog box.
for details on zoning and use of this dialog box.
Tool Bar on page
for more information.
Properties on page
View Area on page
2-3.
4-6. If nothing is selected, the
Properties on page
5-12.
Using the Fabrics View
Default Zone on
Default Zone on
Open
5-6).
5–27