Fit Topology In View; Using The Zone Set Tab; View Area Features - HP 316095-B21 - StorageWorks Edge Switch 2/24 User Manual

Fit Topology in View

This option is also available in the Zoom secondary menu under the View menu on the
menu bar. This displays the entire fabric in the view area. This enlarges elements of
smaller fabrics and reduces elements of large fabrics. Note that for larger fabrics, text
and icons may be difficult to see.

Using the Zone Set Tab

Click the Zone Set tab in the Fabrics view to open the Zone Set tab. Select a fabric in
the Fabric Tree on the left side of the tab to display information on the currently active
zone set for the fabric in the right view area. Initially, a tree structure of zones and
zone members in the active zone set is completely expanded in the display area. An
expanded tree of zone members will also display for the default zone if it is currently
enabled.
Expand and compress the lists of zones and zone sets in the display area by clicking
the icons to the left of the zone and zone set names. You can display all zone members
for each zone, only zone members logged in, or only zone members not logged in
using the drop-down list above the display area.

View Area Features

This section describes the buttons, drop-down lists, and messages that display in the
view area.
• Click the Save Active Zone Set As button to display the Save Active Zone Set As
dialog box. Enter a name for the zone set and click OK to save the active zone set
under a different name in the zone set library.
• Click Refresh to refresh the display area with current zone set data.
• Right-click in the view area to display the Display Options menu. Choose
Nickname to display zone members by nickname (if configured). Choose World
Wide Name to display members by their 16-digit WWN.
• The information area at the bottom of the tab will display one of three messages:
— The Default Zone is ENABLED. If the default zone is enabled, members
in the default zone appear in the tree structure of zones and members in the
display area.
ha-fabric manager user guide
Using the Fabrics View
5–29