HP 316095-B21 - StorageWorks Edge Switch 2/24 User Manual page 178

Information and Error Messages
Message
Default zoning is not
supported in Open
Fabric Mode.
Device is not a member
of a zone in the active
zone set.
Download complete.
Click OK and restart the
HAFM.
Duplicate community
names require identical
write authorizations.
Duplicate Fabric Name.
Duplicate name in
zoning configuration. All
zone and zone set
names must be unique.
Duplicate nickname in
nickname configuration.
A–6
Description
A default zone cannot be
enabled when the product is
enabled for Open Fabric
mode. Open Fabric mode
does not support zone
members defined by port
numbers.
The selected device is not a
member of a zone in the
active zone set and
therefore cannot
communicate with the other
device in the route.
Download of the HAFM and
Product Manager
applications is complete.
If configuring two
communities with identical
names, they must also have
identical write
authorizations.
The fabric name that you
have specified already
exists.
Every name in the zoning
library must be unique.
Duplicate nicknames cannot
be configured.
Action
Change the interop
mode from Open Fabric
mode to Homogeneous
Fabric mode through the
Configure Operating
Mode dialog box in the
Product Manager
application. Or, redefine
zone members by the
WWN of attached
devices.
Enable the default zone
or activate a zone set
containing the member
before attempting to
show the route.
Restart the HAFM
application to continue.
Verify that both
communities with the
same name have the
same write
authorizations.
Choose another name
for the fabric.
Modify (to make it
unique) or delete the
duplicate name.
Modify the selected
nickname to make it
unique.
ha-fabric manager user guide