Using the Fabrics View
Persist Fabric Topology
Click to persist the current fabric configuration. If the fabric is not persisted already,
the Persist Fabric Topology dialog box displays so that you can enter a name for the
fabric. Refer to
Export Fabric Topology
Click to display the Export Fabric Topology dialog box. This option is also available
under the Fabrics menu on the menu bar. For details, refer to
on page
5-18.
Show Zoning Library
Click to display the Zoning Library dialog box. This option is also available under
the Configure menu on the menu bar. For details, refer to
the HAFM on page 6-11
Layout Icons
Click this to change the fabric layout to the default layout for the view area between
circular or spring. This option is also available under the View menu on the menu bar.
Refer to
Layout Icons on page 5-24
Show View Port
Opens up the view port window so that you can adjust the display of the fabric in the
tab's view area. This option is also available under the Fabrics menu on the menu bar.
Click inside the View Port window and move the mouse to adjust the view of the
fabric in the tab's view area.
Zoom In
Click this to zoom in and enlarge the view of fabric elements in the view area. This
option is also available in the Zoom secondary menu under the View menu on the
menu bar.
Zoom Out
Click this to zoom out and reduce the view of fabric elements in the view area. This
option is also available in the Zoom secondary menu under the View menu on the
menu bar.
5–28
Persistent Fabrics on page
for details.
5-14.
Export Fabric Topology
Configuring Zoning through
ha-fabric manager user guide