Editing The Switch Membership List; Switch Binding Membership List Dialog Box - HP 316095-B21 - StorageWorks Edge Switch 2/24 User Manual

4. Click Activate to enable the changes and close the dialog box.
5. Edit the Switch Membership List through the Switch Binding Membership List
dialog box to add or remove Switches and devices that are allowed to connect with
the Switch.

Editing the Switch Membership List

1. Choose the Configure > Switch Binding > Edit Membership List from the
Product Manager window. The Switch Binding Membership List dialog box
displays, as shown in
The WWNs of devices and/or Switches that can currently connect to Switch ports
are listed in the Switch Membership List panel.
Figure 8–4: Switch Binding Membership List dialog box
Refer to Configuring Switch Binding Overview on page 8–7
the Switch Membership List is populated with WWNs according to options set in the
Switch Binding State Change dialog box.
2. If nicknames are configured for WWNs through HAFM and you want these to
display instead of WWNs in this dialog box, click Display Options. The Display
Options dialog box displays.
ha-fabric manager user guide
Figure 8–4.
Optional Features
for information on how
8–9