Configuring Ports; Planning Rules; Planning Rules Syntax And Format; Port Properties Dialog Box - HP 316095-B21 - StorageWorks Edge Switch 2/24 User Manual

The Port Properties dialog box appears
Figure 76

Port Properties dialog box

7. Enter a port number in the Port Number box.
8. Select a port type from the Port Type list (available only for multiport devices).
Click OK.
9.
10.Optionally, right-click a planned device icon and select Planned Device.
The device changes from a planned device to an implemented device.

Configuring ports

You can configure port numbers and types for planned devices.
NOTE: To configure planned ports, planned devices must be connected.
Right-click a planned device icon on the Physical Map and select Ports.
1.
2. Click the small triangle next to the port number.
The Port Properties dialog box appears
3. Enter a number in the Port Number box.
4. Select a port type from the Port Type list.
5. Click OK.

Planning rules

This section describes how to use planning rules to evaluate a plan.
Planning rules specify criteria for a plan evaluation. Rules are stored in the text file
<Install_Home>\Server\Config\Other\rules.dat. You can open the rules.dat file
using any text editor.

Planning rules syntax and format

Planning rules must follow a certain syntax and format.
parameters.
NOTE: You must be an advanced user with administrator privileges to edit planning rules.
118 Optional HAFM features
(Figure 76).
(Figure 76).
Table 13 describes the planning rule