HP 316095-B21 - StorageWorks Edge Switch 2/24 User Manual page 191

Table 23 HAFM Messages (continued)
Message
Management server
could not log you on.
Verify your username and
password.
Management server is
shutting down.
Connection will be
terminated.
Invalid character in field.
Invalid name.
Invalid network address.
Invalid port number.
Valid ports are
(0-< nn >).
Invalid product selection.
Description
An incorrect username or
password (both case
sensitive) was used while
attempting to log in to the
HAFM application.
The HAFM application is
closing and terminating
communication with the
attached product.
An invalid character was
entered in the data field.
One of the following
invalid names was used:
CON, AUX, COM1,
COM2, COM3, COM4,
COM5, COM6, COM7,
COM8, COM9, LPT1,
LPT2, LPT3, LPT4, LPT5,
LPT6, LPT7, LPT8, LPT9,
NUL, or PRN.
The IP address specified
for the product is
unknown to the domain
name server (invalid).
You have specified an
invalid port number.
At the New Product
dialog box, an invalid
product was selected.
Action
Verify the username and password
with the customer's network
administrator and retry the
operation.
Reboot the HAFM appliance. If the
problem persists, contact the next
level of support.
Remove invalid characters from the
entry.
Choose a valid name and retry the
operation.
Verify and enter a valid product IP
address.
Specify a valid port number, in the
range 0 to the maximum number
of ports on the product minus 1.
For example, for a switch with
32 ports, the valid port range is
0–31.
Choose a valid product and retry
the operation.
HA-Fabric Manager user guide 191