Deleting Devices; Displaying A Planned Device As An Installed Device; Editing Port Types; Planned Device Properties Dialog Box - HP 316095-B21 - StorageWorks Edge Switch 2/24 User Manual

The planned device's Properties dialog box appears
Figure 75

Planned device Properties dialog box

2. Enter a nickname for the device in the Nickname box (optional).
3. Enter or edit information.
Click OK.
4.

Deleting devices

To delete planned devices right-click on the planned device icon on the Physical Map and select
Delete.

Displaying a planned device as an installed device

Right-click on a planned device icon on the Physical map and select Planned Device.
• If the Planned Device option is selected, the device icon appears inside a box icon.
• If the option is not selected, the device icon appears without a box.

Editing port types

You can arrange devices and edit a planned device's port types:
NOTE: You can perform this task only in the Planning window.
Select View > Planned SAN from the Planning window menu bar.
1.
2. Add devices as necessary.
3. Rearrange devices as necessary.
4. Connect the devices.
Right-click a planned device icon and select Ports to view the device's ports.
5.
6. Click the black arrow next to the port number.
(Figure 75).
HA-Fabric Manager user guide 117