Configuring Dhcp Snooping Trusted Ports - HP ProCurve 2910al Access Security Manual

Configuring DHCP Snooping Trusted Ports

By default, all ports are untrusted. To configure a port or range of ports as
trusted, enter this command:
ProCurve(config)# dhcp-snooping trust <port-list>
You can also use this command in the interface context, in which case you are
not able to enter a list of ports.
ProCurve(config)# dhcp-snooping trust B1-B2
ProCurve(config)# show dhcp-snooping
DHCP Snooping Information
DHCP Snooping
Enabled Vlans
Verify MAC
Option 82 untrusted policy : drop
Option 82 Insertion
Option 82 remote-id
Store lease database : Not configured
Port Trust
----- ---- -
B1 Yes
B2 Yes
B3 No
Figure 10-4. Example of Setting Trusted Ports
DHCP server packets are forwarded only if received on a trusted port; DHCP
server packets received on an untrusted port are dropped.
Use the no form of the command to remove the trusted configuration from a
port.
Configuring Advanced Threat Protection
: Yes
: 4
: Yes
: Yes
: mac
DHCP Snooping
10-7