Optional Hafm Features; Feature Keys; Configure Feature Key Dialog Box; New Feature Key Dialog Box - HP 316095-B21 - StorageWorks Edge Switch 2/24 User Manual

6

Optional HAFM features

This chapter provides detailed information on using, administering, and configuring optional HAFM
features. There are two types of features:
• Keyed features, which require the purchase of feature keys.
• Features that do not require feature keys, but do require separate keyed features.
This chapter describes the following topics:
• Feature keys, page 95
• Event Management, page 96
• SANtegrity
• Open trunking, page 107
• Performance
• Planning module, page 113

Feature keys

Certain HAFM optional features require the installation of a feature key to validate ownership. Refer
to the HP StorageWorks HA-Fabric Manager Appliance installation guide for more information
about feature keys.
To install and enable a feature key:
1. Obtain the feature key.
Select Configure > Features from the Element Manager window.
2.
The Configure Feature Key dialog box appears
Figure 59

Configure Feature Key dialog box

Click New.
3.
The New Feature Key dialog box appears
Figure 60

New Feature Key dialog box

features, page 102
module, page 110
(Figure 59).
(Figure 60).
HA-Fabric Manager user guide 95