Managing Event Management; Add Rule Dialog Box - HP 316095-B21 - StorageWorks Edge Switch 2/24 User Manual

The Add Rule dialog box appears
Figure 63

Add Rule dialog box

3. Enter information in the following boxes:
• Name
• Group
• Description
Select the Active check box to make the rule active after you are finished creating it.
4.
5. Select the type of trigger from the trigger list.
6. Follow the instructions on the screen.
NOTE: Each selection on the Trigger list or Actions list shows a different dialog box with
instructions. Follow the instructions on each dialog box to create rules.

Managing Event Management

You can turn Event Management on or off by clicking the on or off button on the top right corner or
the Event Management tab.
(Figure 63).
HA-Fabric Manager user guide 101