Renaming A Zone Or Zone Set; Replacing Zone Members; Using The Potential Zone Members List; Using The Domain/Port Or Wwn - HP 316095-B21 - StorageWorks Edge Switch 2/24 User Manual

• Displaying zone
• Saving the active zone set to a zoning
• Comparing zone

Renaming a zone or zone set

To rename a zone or zone set:
1. Display the zone library. (See "Displaying the zone library" on page 177.)
The Zoning dialog box appears
Right-click the zone or zone set that you want to rename and select Rename.
2.
3. Enter the new name. (See
4. Press Enter to save the new name.

Replacing zone members

You can replace zone members in one of two ways:
• Select the replacement zone member from the Potential Zone Member list.
• Specify the replacement member's domain/port or WWN.

Using the Potential Zone Members list

To replace a zone member:
1. Display the zone library.
The Zoning dialog box appears
2. Select the member you want to replace from the Potential Zone Members list.
3. Click Find to find all instances of the member in the configured zones.
4. Click to the right of the Potential Zone Members list to remove the member from the zones.
5. Select the replacement member from the Potential Zone Members list.
6. Click to the right of the Potential Zone Members list to add the member to the zones.
Click OK.
7.

Using the domain/port or WWN

To replace a zone member:
1. Display the zone library. (See
The Zoning dialog box appears
Right-click the member you want to replace and select Replace, or right-click in the Zones
2.
area and select Replace All.
members, page 137
sets, page 138
(Figure
"Zoning naming
(See"Displaying the zone
(Figure
"Displaying the zone
(Figure
library, page 138
78).
conventions" on page 126.)
library" on page 127.)
78).
library" on page 127.)
78).
HA-Fabric Manager user guide 135