HP 316095-B21 - StorageWorks Edge Switch 2/24 User Manual page 189

Table 23 HAFM Messages (continued)
Message
Duplicate nickname in
nickname configuration.
Duplicate World Wide
Name in nickname
configuration.
Duplicate zone in zone
set configuration.
Duplicate zone member
in zone configuration.
Element Manager
instance is currently
open.
Enabling this zone set will
replace the currently
active zone set. Do you
want to continue?
Error connecting to
switch.
Error creating zone.
Error creating zone set.
Error deleting zone.
Error deleting zone set.
Description
Duplicate nicknames
cannot be configured.
A World Wide Name
can be associated with
only one nickname.
More than one instance
of a zone is defined in a
zone set.
More than one instance
of a zone member is
defined in a zone.
A product cannot be
deleted while an instance
of the Element Manager
is open for that product.
Only one zone set can be
active. By enabling the
selected zone set, the
current active zone set
will be replaced.
While viewing routes, the
HAFM appliance was
unable to connect to the
switch. The switch failed
or the switch-to-HAFM
appliance Ethernet link
failed.
The HAFM application
encountered an internal
error.
The HAFM application
encountered an internal
error.
The HAFM application
encountered an internal
error.
The HAFM application
encountered an internal
error.
Action
Modify the selected nickname to
make it unique.
Modify (to make it unique) or
delete the selected World Wide
Name.
Delete one of the duplicate zones
from the zone set.
Delete one of the duplicate zone
members from the zone.
Close the Element Manager, then
delete the product.
Click OK to continue or Cancel to
end the operation.
Try the operation again. If the
problem persists, contact the next
level of support.
Try the operation again. If the
problem persists, contact the next
level of support.
Try the operation again. If the
problem persists, contact the next
level of support.
Try the operation again. If the
problem persists, contact the next
level of support.
Try the operation again. If the
problem persists, contact the next
level of support.
HA-Fabric Manager user guide 189