Changing A User Account; Removing A User Account - HP 316095-B21 - StorageWorks Edge Switch 2/24 User Manual

• User ID
• Password
• Retype Password
4. Select the Enable check box to enable e-mail notification for the user.
A message may appear stating that you must enable event notification for the SAN. Click Yes.
Click the Filter link to specify the event types for which to send e-mail notifications to this user.
5.
See "Filtering event notifications for a
6. Click OK.
The new user appears in the Server Users dialog box.
Click OK.
7.

Changing a user account

To modify a user account:
Select SAN > Users from the HAFM menu bar.
1.
The HAFM 8.6 Server Users dialog box opens
2. Select the user whose information you want to edit.
Click Edit.
3.
The Edit User dialog box opens
4. Edit the information as necessary.
Click OK.
5.
The edited information appears in the Users dialog box.
Click OK.
6.

Removing a user account

CAUTION: This procedure removes the user's account without prompting you for confirmation.
Use the following procedure to remove a user account:
1. Select SAN > Users from the HAFM menu bar.
The HAFM 8.6 Server Users dialog box opens
2. Select the user account you want to remove.
3. Click Remove.
Click OK.
4.
NOTE: If the user is logged in when you remove the account, the account is not affected until the
user logs out and attempts to log in again.
user" on page 54 for details.
(Figure 19
(Figure 20 on page 52).
(Figure 19
on page 52).
on page 52).
HA-Fabric Manager user guide 53