Logging Out Of Hafm; Adding An Appliance; Removing An Appliance - HP 316095-B21 - StorageWorks Edge Switch 2/24 User Manual

2. You may specify a new address by typing it in the field, or selecting one from the drop-down
list.
Localhost is the default value. The application automatically determines the local IP
NOTE:
address and uses that value as the local host address.
3. The HAFM appliance name displays in the Server Name field.
4. Enter your user ID and password.
5. Select whether you want the application to remember your password the next time you log in.
6. Click Login.

Logging out of HAFM

To log into a different HAFM appliance, you must first log out of the current appliance.
1. Select SAN > Log Out.
You are logged out of the current appliance and the HAFM Log In dialog box displays
Refer to "Logging into

Adding an appliance

1. Select SAN > Log Out.
The HAFM Log In dialog box displays (See
2. To add a new appliance, enter the appliance network address in the Network Address field.
TIP: TIP: If the appliance and client are on the same machine, you can type localhost in the
Network Address field.
NOTE: You must have an established login and password account on the new appliance.
The appliance name displays in the Server Name field.
3. Enter your user ID and password.
4. Select whether you want the application to remember your password the next time you log in.
5. Click Login.
The application logs into the appliance located at the specified network address.

Removing an appliance

You can remove appliances from the list in the Log In dialog box.
If you are logged into an appliance, select SAN > Log Out. If you do not have the
1.
application open, start the application.
The HAFM Log In dialog box appears
26 Using the HAFM application
HAFM" on page 25 for instructions on logging in to a new appliance.
(Figure
"HAFM Log In dialog
3).
(Figure
box" on page 25.)
3).