Show Route Dialog Box; Displaying Routes Between Ports - HP 316095-B21 - StorageWorks Edge Switch 2/24 User Manual

Before you display the route between two ports, ensure that:
• All switches or directors in the route are managed by the HAFM application and attached to the
same appliance.
• All switches or directors in the route are attached to the same appliance.
• All switches or directors in the route are Director 2/64, Director 2/140, Edge Switch 2/32,
Edge Switch 2/16, or Edge Switch 2/24 models and are running firmware 1.3 or higher.
• All attached products in the route are in the same zone.
To show the route for two ports:
1. In the Product List, click the plus (+) symbol next to the switch product icon you want to expand.
Right-click a node and select Show Route.
2.
The Show Route dialog box appears
Figure 42

Show Route dialog box

3. Select a destination port from the Destination Port list.
Click OK.
4.
The route between the ports appears
Figure 43

Displaying routes between ports

80 Configuring SAN products and fabrics
(Figure 42).
(Figure 43).