Configuring Static Ports - HP FlexFabric 5950 series Configuration Manual

Setting the aging timers for dynamic ports globally
Step
1. Enter system view.
2. Enter IGMP-snooping view.
3. Set the aging timer for
dynamic router ports
globally.
4. Set the global aging timer for
dynamic member ports
globally.
Setting the aging timers for dynamic ports in a VLAN or VSI
Step
1. Enter system view.
2. Enter VLAN view or VSI
view.
3. Set the aging timer for
dynamic router ports in the
VLAN or VSI.
4. Set the aging timer for
dynamic member ports in the
VLAN or VSI.

Configuring static ports

You can configure the following types of static ports:
•
Static member port—When you configure a port as a static member port for a multicast group,
all hosts attached to the port will receive multicast data for the group.
The static member port does not respond to IGMP queries. When you complete or cancel this
configuration on a port, the port does not send an unsolicited IGMP report or leave message.
•
Static router port—When you configure a port as a static router port for a multicast group, all
multicast data for the group received on the port will be forwarded.
To configure a port as a static port:
Step
1. Enter system view.
2. Enter Layer 2 Ethernet
interface view or Layer 2
aggregate interface view.
3. Configure the port as a static
port.
Command
system-view
igmp-snooping
router-aging-time seconds
host-aging-time seconds
Command
system-view
•
Enter VLAN view:
vlan vlan-id
•
Enter VSI view:
vsi vsi-name
igmp-snooping
router-aging-time seconds
igmp-snooping
host-aging-time seconds
Command
system-view
interface interface-type interface-
number
•
Configure the port as a static
member port:
igmp-snooping
static-group group-address
[ source-ip source-address ]
vlan vlan-id
•
Configure the port as a static
router port:
23
Remarks
N/A
N/A
The default setting is 260
seconds.
The default setting is 260
seconds.
Remarks
N/A
N/A
The default setting is 260
seconds.
The default setting is 260
seconds.
Remarks
N/A
N/A
By default, a port is not a static
member port or a static router
port.