HP 316095-B21 - StorageWorks Edge Switch 2/24 User Manual page 213

Fw 07.00.00/hafm sw 08.06.00 hp storageworks ha-fabric manager user guide (aa-rs2cf-te, march 2005)
Hide thumbs Also See for 316095-B21 - StorageWorks Edge Switch 2/24:
Table of Contents

Advertisement

Table 24
Element Manager Messages (continued)
Message
Firmware file not found.
Incompatible
configuration between
management style and
management server.
Incorrect product type.
Installing this feature key,
while online, will cause
an IPL operation on the
switch and a momentary
loss of LAN connection.
This operation is
nondisruptive to the Fibre
Channel traffic. Do you
wish to continue installing
this feature key?
Internal file transfer error
received from director.
Invalid character in field.
Invalid configuration
name.
Invalid feature key.
Description
The firmware version is
not installed (or was
deleted) from the
firmware library at the
HAFM appliance.
If the Firmware is below
the required level, only
FICON management
style is allowed if the
FICON Management
Server feature is enabled.
You attempted to enable
Open Systems
management style.
When configuring a new
product through the New
Product dialog box, an
incorrect product was
specified.
If the switch is online,
installing the new feature
key will cause an internal
program load (IPL). The
LAN connection to the
HAFM appliance will be
lost momentarily, but
Fibre Channel traffic will
not be affected.
The director or switch
detected an internal file
transfer error.
An invalid character was
entered in the Data field.
Attempted to save an
address configuration
name with an invalid
name.
The feature key was not
recognized.
Action
Add the firmware version to the
library and retry the operation.
Disable FICON Management
Server, enable the Open Systems
Management Server, or enable the
Open Systems management style.
Choose the correct product type
for the product with the network
address.
Click Yes to install the feature key
or No to not install.
Retry the operation. If the problem
persists, contact the next level of
support.
Remove invalid characters from the
entry.
Use up to 24 alphanumeric
characters, including spaces,
hyphens, and underscores.
Re-enter the feature key. Ensure
that you type each character in the
correct case (upper or lower),
include the dashes, and do not
add any spaces at the end.
HA-Fabric Manager user guide 213

Advertisement

Table of Contents
loading

Table of Contents