Saving The Active Zone Set To A Zoning Library; Comparing Zone Sets; List Zone Members Dialog Box - HP 316095-B21 - StorageWorks Edge Switch 2/24 User Manual

The List Zone Members dialog box appears
Figure 86

List Zone Members dialog box

Click Close to close the dialog box.
4.

Saving the active zone set to a zoning library

When you manage a switch's zone set through one appliance, and then import that switch into a
new appliance, you must save the zone set on the new appliance, This allows pre-existing zoning
information on the switch to be stored on the new appliance.
Select Configure > Zoning from the HAFM menu bar.
1.
The Zoning dialog box appears
2. Select a fabric from the Fabric list.
Click the Active Zone Set tab.
3.
4. Select the active zone set and click Save As.
The Save Active Zone Set As dialog box appears.
Rename the active zone set and click OK.
5.
The switch's zoning information is imported to the new appliance. You can now manage zones
and zone sets through the new appliance.

Comparing zone sets

To compare two zone sets:
1. Select Configure > Zoning from the HAFM menu bar.
The Zoning dialog box appears
2. Select a fabric from the Fabric list.
3. Click the Activate Zone Set tab.
4. Click Compare With.
138 Zoning
(Figure 86).
(Figure 78 on page 127).
(Figure 78 on page 127.)