HP 316095-B21 - StorageWorks Edge Switch 2/24 User Manual page 193

Table 23 HAFM Messages (continued)
Message
Invalid World Wide
Name or nickname.
Invalid World Wide
Name. Valid WWN
format is: xx:xx:xx:xx:xx:
xx:xx:xx.
Invalid zone in zone set.
Limit exceeded.
No address selected.
No attached nodes
selected.
No management server
specified.
Description
The World Wide Name
or nickname that you
have specified is invalid.
The valid format for the
World Wide Name is
eight two-digit
hexadecimal numbers
separated by colons
(xx:xx:xx:xx:xx:
xx:xx:xx). The valid
format for a nickname is
non blank characters, up
to 32 characters.
The specified World
Wide Name format is
invalid. The valid format
is eight two-digit
hexadecimal numbers
separated by colons
(xx:xx:xx:xx:
xx:xx:xx:xx).
The defined zone no
longer exists and is
invalid.
You cannot add a new
product or user to HAFM
application if the
maximum number of that
resource already exists
on the system.
You cannot complete the
operation because an
address has not been
selected.
An operation was
attempted without an
attached node selected.
An HAFM appliance is
not defined to the HAFM
application.
Action
Try the operation again using a
valid World Wide Name or
nickname.
Retry the operation using a valid
WWN or nickname.
Delete the invalid zone from the
zone set.
Delete unneeded products or users
from the system, before attempting
to add any new ones.
Choose an address and retry the
operation.
Choose an attached node and try
the operation again.
At the HAFM 8 Log In dialog box,
type an appliance name in the
Server Name field and click
Login.
HA-Fabric Manager user guide 193