• STATUS = invalid UNITS
• STATUS = error parsing ACTION
• STATUS = error parsing ACCTNUM
• STATUS = error parsing SUBACCTNUM
• STATUS = error parsing BOND
• STATUS = error parsing VELLUM
• STATUS = error parsing FILM
• STATUS = error parsing SCAN
• STATUS = UNITS error, Using default units, DM.
• STATUS = error parsing UNITS
• STATUS = Account(s) reset
• STATUS = RESET error
• STATUS = Account(s) deleted
• STATUS = CREATE error
• STATUS = Account created
• STATUS = DELETE error
• STATUS = Account(s) deleted
• STATUS = RESTORE error
• STATUS = Account(s) restored
• STATUS = Accounting Disabled
• STATUS = UNITS required for restore
• STATUS = Max Accts exceeded
• STATUS = Max Subaccts exceeded
• STATUS = pjlErr in procXesAccounting
• STATUS = INFO error
6.9.3 Release 6.2 Returned Status
This command is no longer supported in Release 6.2. In response to this command, the controller will
send the following legacy error message back on the sending channel:
Accounting is Disabled.
Version 10.0
AccXES PJL Interface
Page 110 of 160