Xerox 850DP - Phaser Color Solid Ink Printer Manual page 26

The angle bracket characters are required except in the sequence <cr> which indicates a carriage
return character (0x0d). The curly brace characters are not permitted.
Each of the italicized strings in the format specification is replaced with a value that describes the
AccXES firmware data. The values are:
Specification
product 8830 or 8855
hwrev 1, 2, or 3 to indicate the revision of the
AccXES controller card
ps Yes, no, or override.
postscript firmware will be overwritten.
no, only existing non-postscript firmware will
be overwritten.
firmware can be overwritten.
type Boot or appl to indicate boot ROM code or
application space code.
slot Indicates the parameters for the flash file
system. See the next Table.
method Merge or replace to indicate method of
updating AccXES PSM values.
addr Destination address of the firmware with
preceding
METHOD=replace.
bytes Number of bytes in AccXES Firmware Data
field
checksum 32-bit checksum of AccXES Firmware Data
preceded with "0x"
version User-definable identifier up to 20 characters
in length
Table: AccXES Firmware Download Fields
The values of the SLOT specification are detailed in the following table:
TYPE SLOT
BOOT 0 Revision 1 controller, 512 KB boot flash
device
1 Revision 2 controller, 1 MB boot flash device
APPL 0 Revision 1 controller, 4 MB system flash
device
1 Revision 2 controller, 4 MB system flash
device
2 Revision 1 controller, 8 MB system flash
device
3 Revision 2 controller, 8 MB system flash
device
4 Revision 3 controller, 7 MB system flash
device
Table: AccXES Firmware Dnld Slot Decode
Version 10.0
AccXES PJL Interface
Values
If yes, only existing
If override, any existing
"0x". Valid
DESCRIPTION
Page 21 of 160
If
with