Xerox 850DP - Phaser Color Solid Ink Printer Manual page 74

5.1.6.1.2 ACTIVEPARAMSET
This parameter sets the active parameter set in use as the current user default environment. There are
10 parameter sets numbered 0 through 9. A parameter set is all those parameters in the EMULATION,
PAGE, and JOB parameter groups. Parameters which refer to the physical printer are not included,
such as those in the COMMUNICATIONs class and PRINTER STATEs class.
All parameter setting operations from either the OCP or PJL which affect the current user default
environment (eg. @PJL DEFAULT commands) affect the parameter set specified by this
ACTIVEPARAMSET. The printer will treat the ACTIVEPARAMSET variable as a special case and will
logically duplicate its current value among all 10 sets.
A new job entering the system will inherit the parameters from the parameter set specified by the
ACTIVEPARAMSET variable. This set will be the basis of the Current User Job Environment for that
job. In short, a new job starts out with a copy of the parameter set specified by ACTIVEPARAMSET.
Subsequent @PJL SET commands modify that set for the associated job.
The range of this parameter is 0 through 9. The default value is 0.
5.1.6.1.3 LANG
This variable stores the current language of the user interface on the printer. Changing this value will
affect the language displayed on the printer front panel interface and the language of the feedback
messages from the printer. The factory default value is ENGLISH.
The following languages are currently supported:
• ENGLISH
• FRENCH
• GERMAN
• ITALIAN
• EUROPEAN SPANISH
• SOUTH AMERICAN SPANISH
• UK ENGLISH
• SOUTH AMERICAN PORTUGESE
• DUTCH
• RUSSIAN
• SWEDISH
• TURKISH
• CZECH
5.1.6.1.4 PALETTEOVERRIDE (Obsolete)
Version 10.0
AccXES PJL Interface
Page 69 of 160