Xerox 850DP - Phaser Color Solid Ink Printer Manual page 88

Version 10.0
AccXES PJL Interface
5.1.7.1.18 PAGECOMPMEDIATYPE
This parameter is active only if PAGECOMPENABLE is set to ON. It specifies the media type for the
page composition media onto which constituent page composition files are placed. Note that when this
parameter is active, then MEDIATYPE is ignored throughout the remainder of the page composition
job. The default value is PAPER. The range is {PAPER, INKJETBOND, PRESENTATIONBOND,
ELLUM, FILM, ANY}.
If the printer does not have the media of the requested size and type, then it automatically moves into a
"blocking" (query) mismatch mode.
5.1.7.1.18.1 PAGECOMPMEDIATYPE (Release 6.2)
The set of valid media types for 6.2 and later release are {PAPER, BOND, VELLUM, FILM, PHOTOFILM,
OATEDBOND, TRANSPARANCY, INKJET, and
SPECIAL}
The default value is BOND.
5.1.7.1.19 PAGECOMPMEDIANAME
This command should be used in place of the PAGECOMPMEDIATYPE command starting with
AccXES V7.5.
This parameter is active only if PAGECOMPENABLE is set to ON. It specifies the media type for the
page composition media onto which constituent page composition files are placed. Note that when this
parameter is active, then MEDIANAME is ignored throughout the remainder of the page composition
job.
The valid strings that may be passed as arguments to this command may be found using the @PJL
INFO XESMEDIA command.
5.1.7.1.20 PAGECOMPPAPER
This parameter is active only if PAGECOMPENABLE is set to ON. It specifies the media sheet size for
the page composition canvas onto which constituent page composition files are placed. This variable
may take on only valid sheet sizes; roll sizes or autosizing are not allowed. Note also that constituent
files within the page composition will have their own "virtual" paper size specified through the normal
PAPER variable. The range of PAGECOMPPAPER is { LETTER, LEDGER, ANSI_A, ANSI_B,
NSI_C, ANSI_D, ANSI_E, ARCH_A, ARCH_B,
ARCH_C, ARCH_D, ARCH_E, ARCH_30, ISO_A0, ISO_A1, ISO_A2, ISO_A3, ISO_A4, ISO_B1,
ISO_B2, ISO_B3, ISO_B4, JIS_B1, JIS_B2, JIS_B3, JIS_B4}. The default value is ARCH_E.
If the printer does not have the media of the requested size and type, then it automatically moves into
a "blocking" (query) mismatch mode.
5.1.7.1.21 PRIORITY
This integer value sets the job scheduling priority for the user job. A higher value indicates a higher
scheduling priority. The valid range is 1 through 10. The factory default value is 5.
5.1.7.1.22 SINGLEJPGJOB
Page 83 of 160