Comment; Job Separation Commands; Job; Eoj - Xerox 850DP - Phaser Color Solid Ink Printer Manual

• JPEG
• ASCII
• FLASH
• DOWNLOAD
• FILENET
The FLASH and DOWNLOAD values are special values used for upgrading printer firmware and
downloading rendering objects such as raster stamps and fonts, respectively. The objects supported by
the DOWNLOAD facility are detailed in the DOWNLOAD Language section
As in standard HP-PJL, the INFO CONFIG command can be used to query the printer for the list of
currently supported data formats. Note that the LANGUAGE parameter to the HP-PJL ENTER
command detailed above is distinct from the standard HP-PJL Environment variable LANG which is
used to set the user interface language to English, French, Italian, etc. Note also, that there is another
environment variable called PERSONALITY which can take on the same values as the LANGUAGE
parameter above.
As specified in the HP-PJL specification [HP96], the next byte following the line feed at the end of the
ENTER command must be the actual job data. In particular, no further HP-PJL commands can be
placed between this command and the specified data format's job data.

3.1.3 COMMENT

The COMMENT command is implemented as defined on page 4-6 of [HP96]. In addition, custom
commands specific to AccXES functionality are implemented within a COMMENT command. See the
Comment Command section for details.

3.2 Job Separation Commands

3.2.1 JOB

This command is supported as defined on page 5-2 in [HP96]. All parameters are supported: NAME,
START, PASSWORD, and END. The maximum length of a valid NAME parameter is 80 characters.
Longer names will be truncated. The START and END parameters may not be supported in all AccXES
implementations.
From the HP-PJL Reference Manual (10 Edition, Oct 1997), the following requirement is explicitly
re-stated here for clarity:
"JOB commands can be nested. For example, a spooling application can send a PJL job that uses the
JOB command to another spooler that encapsulates the spooled job with another JOB/EOJ command
pair. When this is done, note that the job name from the outer JOB command is cleared or overwritten
by the inner command."

3.2.2 EOJ

The EOJ command is supported as defined on page 5-7 of [HP96]. The maximum length of the NAME
parameter supported is 80 characters. Currently, while the NAME parameter is accepted, it is
effectively ignored.

3.3 Environment Commands

Version 10.0
AccXES PJL Interface
Page 5 of 160