Xes_Sys_Stat - Xerox 850DP - Phaser Color Solid Ink Printer Manual

The NAME variable is the value of the JOB NAME parameter if one was given. If not, then the string
is a null string. The STATE variable encodes the state of the job. Possible states are listed below:
• DONE
• ACTIVE
• SUBMITTING (6030 and 6050 only)
• SUBMITTED (6030 and 6050 only)
• CANCELLED
• CANCELLING
• MISMATCHQUEUED
• MISMATCHBLOCKED
PRIORITY is an integer number representing the scheduling priority of the job. Higher numbers
indicate higher scheduling priority. DATAFORMAT is the data format of the job. See the environment
variable PERSONALITY for the list of possible values. SIZE is the size of the job in bytes. This number
may not be accurate until the job has completely downloaded.
PORT is one of the following values representing the host interface over which the job was transmitted.
• SERIAL
• PARALLEL
• VPI
• SCSI
• ETHERNET
NETWORK indicates the Milan NIC plug-in network card; ETHERNET indicates the on-board
Ethernet port. UNKNOWN indicates an error in identification
• UNKNOWN
• INTERNAL
• SCANNER
The owner is the string value of the OWNER environment variable associated with the job. It is
intended to reflect a string identifying who sent the job.
• NETWORK
Jobs are listed in the order in which they will print. The job currently printing is listed first.

6.17 XES_SYS_STAT

Version 10.0
AccXES PJL Interface
Page 117 of 160